HZ-150THZ-150T平板式重型洗轮机 (可定制任意尺寸)

HZ-150T平板式重型洗轮机 (可定制任意尺寸)

 

  150T工程洗车机主要应用于大型建筑工地,煤矿、电厂、港口、码头,主要清洗车辆多为半挂车、拉煤车居多。而且大部分车辆重量在100吨以上,拉煤车辆不同于建筑工地土方车,长而且重,所以这种加重型设备,可以根据客户现场情况进行订做,长度一般为6米、8米、10米、12米甚至更长,原材料为加重型国标方管(抗压),控制柜元器件均为正泰或者德力西品牌(大品牌、安全),进口日本名牌红外线感应器(耐用),配备我厂定制多功能外壳(防水、防爆)。加长重型设备水泵与设备连接管均为镀锌铁管现场焊接,水泵为“南方泵业股份有限公司”特质水泵、“江苏飞龙泵业”高压水泵。精良的焊接技术、优质的进口原材料、搭配国际大品牌零配件的有机结合,150T洗车机的地位。

项目

HZ-150T型  (定制型)

长×宽×高

4000×6000×1200mm

清洗方式

车辆自行

清洗选择

自动、手动

冲洗压力

4-5kg/c㎡

电源

三相380V   50HZ

功率

15KW

耗水量

循环用水

洗车速度

70-80辆/分钟

启动方式

机械感应

排泥方式

直排、人工排

联系人:陈晓手机:15069790052微信;15069790052/13518655960QQ:1935593123邮箱;1935593123@qq.com网址:http://shop1402678717282.1688.com/
该公司产品分类: 仪器

Phasor系列Phasor系列超声波探伤仪-美国GE

我公司为GE检测科技华南授权经销商,欢迎来电咨询!公司网址:www.sztmp.com 

Phasor系列超声波探伤仪提供4款不同型号,具有可升级的特点和优势。Phasor CV是编码兼容的传统超声波探伤仪,可升级为Phasor 16/16 Weld或16/64 Phasor XS。可通过快速简便的软件升级至相控阵Phasor 16/16 Weld或相控阵Phasor XS.无需更换主基板硬件,利用相同的简单菜单驱动的界面作为Phasor CV模型,不需要培训。与相控阵传感器相结合,两个平台都可以在更短的时间内,以合理的价格解决您最苛刻的检测应用要求。

Phasor 16/16 Weld和Phasor XS可以迅速切换到常规UT,这样检测员可以使用任何标准的传感器,评估检测到的缺陷(定位和尺寸)是否符合指定标准或测试规范的要求。

Phasor CV/DM集相控阵成像设备和传统的探伤仪于一体,具有相控阵探头,可以显著提高腐蚀检测数据的性。

特色:

 

改进的检测生产率

下载

 

 
接受软件条款 close
 
NOTICE – READ THIS  CAREFULLY: THIS IS A LEGAL AND BINDING  AGREEMENT BETWEEN YOU AND LICENSOR. BY INSTALLING THE SOFTWARE, YOU AGREE TO  ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LICENSE (“LICENSE”). IF YOU DO  NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD OR INSTALL THE SOFTWARE. 1. Definitions Unless otherwise agreed to by Licensor, the following terms shall mean: “Documentation” means all material, including all printed material and on-line or electronic documentation (excluding training materials), referencing the Software and Third-Party Software provided hereunder. “Software” means Licensor’s proprietary computer software and software security devices provided by Licensor under this License. “Third-Party Software” means any proprietary computer software owned by a third party that Licensor may provide to you hereunder. 2. License Grant 2.1 Subject to the terms of this License, Licensor hereby grants to you a non-transferrable and nonexclusive license to use the Software and Documentation, including upgraded, modified or enhanced versions provided by Licensor and to use the Third-Party Software, all for your internal business purposes only 2.2 You have no right to (i) lease, rent, transfer, distribute, sublicense, timeshare or allow third parties to access the Software, Documentation or Third-Party Software, nor assign any rights hereunder to a third party without Licensor’s prior, written agreement; (ii) disassemble, decompile, reverse engineer or otherwise attempt to reconstruct or discover the source code of the Software or Third-Party Software; (iii) pledge the Software or Third-Party Software as collateral or otherwise or encumber such Software or Third-Party Software with any lien or security interest; or (iv) remove any product identification, copyright, trademark or other notice from the Software, Documentation or Third-Party Software. If you  believe that you are entitled to reverse engineer the Software as a matter of local law (e.g., the Council Directive of May 14, 1991, of the Council of the European Communities, as amended), you agree that you shall first request technical information from Licensor. You shall use any technical information delivered by Licensor only for purposes of ensuring “interoperability” and compatibility and shall treat such technical information as Proprietary Information (defined below). Any reverse engineering of the Software shall void any warranties or indemnification obligations of Licensor and shall automatically release Licensor from any obligation to provide support services under this or any separate agreement. 2.3  Certain software Licensor provides to you may contain Third-Party Software, including but not limited to “open source” software. Use of the Third-Party Software and its source code may be governed by separate copyright notices and license provisions, which may be found or identified in the Documentation or on the media delivered with the Software and which are incorporated by reference into this License. You shall not modify or combine the Software and/or any Third-Party Software in any manner that could cause, or could be interpreted or asserted to cause, the Software or any modifications thereto to become subject to the terms of any license applicable to Third Party Software. 2.4  Unless otherwise agreed to by Licensor or specified on your accepted Purchase Order, you shall only have the right to install and use a single copy of the Software and Third-Party Software on a single computer workstation for use by a single user, which may be referred to as a “CPU License.” If “Local Area Network License” rights were purchased, you are authorized to install and use by the designated maximum number of concurrent users on any number of I/O access stations for a designated Local Area Network (LAN). LAN is defined as a hard-wired computer network system which inter-connects computers within a building, facility or site. A facility or site is defined as a production factory or plant producing a product or multiple products at a single location. Concurrent users are defined as your employees logged onto the software application at the same time regardless of activity. Use over a Wide Area Network (WAN) is strictly prohibited, except as may be provided by separate agreement resulting from special license negotiations. WAN is defined as any computer network system that inter-connects one or more computers within a building, facility or site to one or more computers residing outside the same building, facility or site. 2.5 You may make one (1) copy of the Software, Documentation and Third-Party Software for backup purposes only. You must reproduce and include all proprietary rights and copyright notices on any backup copies. Except as authorized under this License, no copies of the Software, Documentation or Third-Party Software may be made by you or any third party; provided, however, you may print online Software documentation for its own internal use, provided the maximum number of copies may not exceed the number of users  licensed hereunder. 3. Support Services; Upgrades This License does not obligate Licensor to provide maintenance and support on any  Software or Third-Party Software licensed hereunder. Support services are available under separate agreement. If the Software is an upgrade of a previous version (provided such upgrade was obtained under a separate support services agreement with Licensor or a Licensor authorized distributor), you may use the upgraded Software only in accordance with this License. Licensor will use commercially reasonable attempts to answer your technical support requests concerning the Software during Licensor’s normal business hours; however, this service is offered as a convenience to you, and Licensor may not be able to resolve every support request. For technical support requests, you may contact Licensor, as indicated in the Documentation or Help section of the Software. Licensor reserves the right to charge for customer support services, provided you receives advance notice of all applicable charges. IN NO EVENT WILL GE OR ITS SUPPLIERS BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT, CONSEQUENTIAL, PUNITIVE OR SIMILAR DAMAGES OF ANY KIND RESULTING FROM THE DELIVERY OR NON-DELIVERY OF TECHNICAL SUPPORT SERVICES OF ANY  KIND. THIS INCLUDES, BUT IS NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, DAMAGE TO ANY PARTY\\\\\\\\'S COMPUTER OR OTHER EQUIPMENT AND THE LOSS OF ANY DATA. 4. Verification During the term of this License and for 3 years thereafter, Licensor may upon reasonable notice require that an independent audit of the use of the Software and Third-Party Software be conducted during your normal business hours. Upon such notice, you shall provide Licensor’s independent auditor site access and  the right to inspect relevant portions of your computer system on which the Software and Third-Party Software resides. 5. Term and Termination 5.1 The Software, Documentation and Third-Party Software shall be considered accepted by you upon receipt. 5.2 This License is effective until terminated. Licensor may terminate this License immediately if you fail to comply with any of the terms and conditions herein. Upon termination, you shall (a) cease using the Software, Documentation and Third-Party Software and (b) certify to Licensor within one (1) month of termination that you have destroyed or returned to Licensor the Software, Documentation and Third-Party Software, and all copies thereof. 6. Ownership 6.1 All Software, Documentation and Third-Party Software are licensed and not sold. You agree that Licensor and its suppliers own all proprietary rights, including, but not limited to any patent, copyright, trade secret, trademark and other proprietary rights in and to the Software, Documentation and Third-Party Software, including any Derivative  Works thereof, and any corrections, bug fixes and updates to such Software, Documentation, Third-Party Software or Derivative Works. For purposes hereof, “Derivative Works” shall mean (i) any work that is based upon one or more pre-existing works, such as a revision, enhancement, modification, translation, abridgement, condensation, expansion, extension or any other form in which such pre-existing works may be recast, transformed or adapted, and that, if prepared without the authorization of the owner of the copyright to such pre-existing works would constitute a copyright infringement and (ii) any compilation that incorporates such a pre-existing work. You shall have only a “right to use” license to any Derivative Works in accordance with the terms of this License. 6.2 For the purposes of this Article, the term “Licensor” shall mean Licensor, its  affiliates and their successors or assigns. 7. Limited Warranties 7.1 Licensor warrants, for your benefit alone, that under normal use the media in which the Software is embedded shall be free from defects in material and  workmanship, for a period of one (1) year from the date of delivery of the initial Software (“Warranty Period”). 7.2 Licensor warrants, for your benefit alone, that during the Warranty Period, the  Software will perform substantially in accordance with its Documentation. If, during the Warranty Period, an Error occurs (where “Error” is defined as a problem caused by an incorrect operation of the unmodified computer code in the Software or an incorrect statement or diagram in the Documentation that produces incorrect results), Licensor will use commercially reasonable efforts to correct such Error, provided you furnish Licensor with the following: (a) written notice of the warranty claim,  including a description of the failure to perform in accordance with the Documentation and a specific description of the operating conditions (including the specific software/hardware configuration) under which the failure occurred and (b) to the extent feasible, a representative sample of inputs for repeating and analysing the failure. If Licensor is unable, after commercially reasonable efforts, to correct the Error, your sole remedy shall be termination of this License and a refund of the license fees allocable to the specific nonconforming Software that have been paid by you to Licensor hereunder. 7.3 This Article sets forth the exclusive remedies for all claims based on failure of or defect in the Software and Documentation, whether the failure or defect arises before or during the Warranty Period and whether a claim, however instituted, is based on contract, indemnity, warranty, tort (including negligence) or civil liability, strict liability or otherwise. The warranties provided herein are  exclusive and are in lieu of all other warranties and guarantees whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Without limiting the foregoing, Licensor does not warrant that the Software or Documentation (or YOUR use thereof) will be free from all errors or its use will be uninterrupted. 7.4 Any remedial steps taken by Licensor hereunder shall not extend the applicable Warranty Period. 7.5 Except as expressly authorized by Licensor in writing, all Third-Party Software shall carry only the warranties provided by the owners thereof and Licensor gives no warranties for such Third-Party Software. 8. Proprietary Information; Equitable Relief 8.1 All information concerning or embedded in the Software (including but not limited to source code and training materials), Documentation and Third-Party Software is confidential and shall be considered Licensor’s (or its suppliers’) proprietary information (“Proprietary Information”) whether or not the information is marked as Proprietary Information. The Proprietary Information includes commercially valuable, substantial trade secrets, the design and development of which reflect the effort of skilled development experts and investment of considerable amounts of time and money. 8.2 You acknowledge: (a) any use of the Software, Documentation or Third-Party Software in a manner inconsistent with this License or (b) any other misuse of the Proprietary Information of Licensor (or its suppliers), will cause immediate irreparable harm to Licensor (or its suppliers) for which there is no adequate remedy at law. You agree that Licensor (or its suppliers) shall be entitled to immediate and permanent injunctive relief from a court of competent jurisdiction in the event of any such misuse or threatened misuse by you. The parties agree and stipulate that Licensor shall be entitled to such injunctive relief without posting of a bond or other security; provided, however, that if the posting of a bond is a prerequisite to obtaining injunctive relief, then a bond in an amount equivalent to U.S. $1,000 shall be sufficient. Nothing contained herein shall limit Licensor’s right to any remedies at law, including the recovery of damages from you for breach of this License. 9. Compliance With Laws You understand and recognize that the Software, Documentation and Third-Party Software made available to you hereunder are subject to all applicable trade control laws and regulations. You hereby agree that you will not tranship, re-export, divert or direct the Software, Documentation or Third-Party Software, other than in and to the ultimate country of destination specified on your order or declared as the country of ultimate destination on Licensor’s invoice, except as permitted by applicable laws and regulations. 10. Limitation  of Liability 10.1 The total liability of Licensor, on all claims of any kind (excluding claims for death or bodily injury), whether in contract, warranty, indemnity, tort/extracontractual liability (including negligence), strict liability or otherwise, arising out of the performance or breach of this License or use of any Software, Documentation and Third-Party Software, shall not exceed the price of the specific Software, Documentation or Third-Party Software giving rise to the claim. All Licensor’s liability under this License shall terminate upon the expiration of the Warranty Period, provided that you may enforce a claim of such liability accruing during the Warranty Period by an action timely commenced in accordance with the applicable statute of limitations or statute of repose, but in no event greater than one (1) year after the expiration of such Warranty Period. 10.2 In no event, whether as a result of breach of contract, warranty,  tort/extracontractual liability (including negligence), strict liability, indemnity or otherwise, shall Licensor be liable for loss of profits or revenues, loss of use of the Software, Documentation or Third-Party Software or any associated equipment, interruption of business, cost of capital, cost of cover, downtime costs, claims of your customers for such damages or for any special, consequential, incidental, indirect, punitive or exemplary damages. 10.3 If Licensor furnishes you with advice or assistance that is not required under this License, the furnishing of such advice or assistance will not subject Licensor to any liability, whether in contract, indemnity, warranty, tort (including negligence), strict liability or otherwise. 10.4 For the purposes of this Section 10, the term “Licensor” shall mean Licensor, its affiliates, subcontractors and suppliers of any tier and their respective agents and employees, whether individually or collectively. 11. Dispute Resolution, Governing Law 11.1 If you have your pertinent place of business in a country other than the U.S.,  Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the Philippines, any dispute arising out of or in connection with this License, including any question regarding its existence, validity or termination, shall be referred to and finally resolved by arbitration under the London Court of International Arbitration (“LCIA”) Rules, which Rules are deemed to be incorporated by reference into this clause. The number of arbitrators shall be one unless the amount in dispute exceeds the equivalent of $1,000,000, in which event it shall be three. When three arbitrators are involved, each party shall appoint one arbitrator, and those two shall appoint the third, who shall be the Chairma. None of the arbitrators may be a national or resident of the countries in which either party is organized or has its principal place of business. The seat, or legal place, of arbitration shall be London, England. The arbitration shall be conducted in the English language. In reaching their decision, the arbitrators shall give full force and effect to the intent of the parties as expressed in this License, and if a solution is not found herein, shall apply the governing law of this License. The decision of the arbitrator shall be final and binding upon both parties, and neither party shall seek recourse to a law court or other authority to appeal for revisions of such decision. 11.2 If you have your pertinent place of business in the U.S., Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the  Philippines, any dispute arising out of or in connection with this License, shall be brought in the U.S. District Court for the Northern District of New York, or in the event that court lacks jurisdiction to hear the claim, in the appropriate state courts of Onondaga County, New York, and the parties irrevocably consent to the exclusive jurisdiction of such courts in respect of all such claims. Each party hereby submits to and accepts generally and unconditionally the jurisdiction of those courts with respect to its respective person and property, and irrevocably consents to the service of process in connection with any such action or proceeding by personal delivery to the party or by the mailing thereof by registered or certified mail, postage prepaid to the other party at the address for the party. 11.3 The validity, performance and all matters relating to the interpretation and effect of this License and all further documents executed pursuant to it shall be construed and interpreted in accordance with the laws of (i) the State of  New York, U.S., if you have your pertinent place of business in the U.S. or (ii) England and Wales if you have your pertinent place of business outside of the U.S., excluding its rules on the conflict or choice of laws. If you have your pertinent place of business outside of the U.S., the United Nations Convention on Contracts for the International Sale of Goods shall not apply. 12. Patent Indemnification 12.1 Subject to the terms of this License, Licensor shall indemnify you against any damages, costs and expenses arising out of any suit, claim or proceeding (a “Claim”) alleging that the Software or Documentation infringes a patent in effect in the U.S., an EU member state or country of delivery (provided there is a corresponding patent issued by the U.S. or an EU member state) or U.S. copyright or copyright registered in the country of delivery; provided that: (a) you promptly notify Licensor in writing of any such Claim; (b) you make no admission of liability and gives Licensor sole authority, at Licensor’s expense, to direct and control all defense, settlement and compromise negotiations; and (c) you provide Licensor with full disclosure and assistance that may be reasonably required to defend any such Claim. 12.2 Licensor shall  have no obligation or liability with respect to any Claim based upon: (a) any Software or Documentation that has been altered, modified or revised; (b) the combination, operation or use of any Software or Documentation with other products when such combination is part of any allegedly infringing process; (c) failure of you to implement any update provided by Licensor that would have prevented the Claim; or (d) unauthorized use of Software or Documentation, including, without limitation, a breach of the provisions of this License. 12.3 Should any Software or Documentation or any portion thereof, become the subject of a Claim, Licensor may at its option (a) procure for you the right to continue using the Software or Documentation or portion thereof, (b) modify or replace it in whole or in part to make it non-infringing or (c) failing (a) or (b), take back the Software or Documentation and refund any fees received by Licensor attributable to the infringing Software or Documentation. 12.4 This states Licensor’s entire liability for indemnification for patent, trademark, copyright and trade secret infringement for the Software or Documentation. 12.5 Notwithstanding the foregoing, with respect to any Third-Party Software or portions thereof, only the indemnity of the manufacturer/developer, if any, shall apply. 13. General Clauses 13.1 Software and Third-Party Software licensed hereunder are not intended for use in connection with any nuclear facility or activity without the written consent of Licensor. You warrant that you shall not use or permit others to use Software or Third-Party Software for such purposes, unless Licensor agrees to such use in writing. If, in breach of the foregoing, any such use occurs, Licensor disclaims all liability for any nuclear or other damages, injury or ontamination and in addition to any other legal or equitable rights of Licensor, you shall indemnify and hold Licensor harmless against any such liability. If Licensor agrees in writing to any such nuclear use, Licensor’s special terms and conditions for nuclear applications and protections against nuclear liability shall be attached and incorporated fully herein by reference. 13.2 Licensor may assign or novate its rights and obligations under this License, in part or in whole, to any entity directly or indirectly controlling, controlled by or under common control with Licensor without your consent. You agree to execute such documents as may be necessary to effect the assignment or novation. The delegation or assignment by you of any or all of your duties or rights under this License without Licensor’s prior written consent shall be void. 13.3 If any provision of this License is found to be void or unenforceable the remainder of this License shall not be affected and the parties hereby agree that they will replace any such void or unenforceable provision with a new provision that achieves substantially the same practical or economic effect and which is valid and enforceable. 13.4 This License represents the entire agreement between the parties, and no  modification, amendment or waiver shall be binding on either party unless agreed in writing by the parties’ authorized representatives. 13.5 For direct and indirect U.S. government contracts only, all Software,  Documentation and Third-Party Software provided hereunder shall be considered “commercial items” as defined in FAR Part 2, 2.101 and in accordance with FAR 52.244-6. If the reasonableness of the price cannot be established, if cost or pricing data is required for any other reason, or if the Software,  Documentation or Third-Party Software cannot be considered “commercial items,” Licensor may withdraw the proposal or cancel this License without penalty or other liability. 13.6 Upon request you agree to provide Licensor with a signed copy of this License.
 
page-loader
  close
 
 
 
 
说明 中文 English Français Deutsch 日本語 Português RU Español
Corrosion Erosion Brochure   acrobat-reader         acrobat-reader  
Inspection Technologies Brochure   acrobat-reader   acrobat-reader     acrobat-reader acrobat-reader
Phasor CV Brochure   acrobat-reader acrobat-reader acrobat-reader   acrobat-reader   acrobat-reader
Phasor CV/DM Brochure   acrobat-reader         acrobat-reader  
Phasor PDI Kit Brochure   acrobat-reader            
Phasor Series   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Brochure             acrobat-reader  
Phasor Series Operating Manual   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Overview Flyer   acrobat-reader         acrobat-reader  
Phasor Series Quick Start acrobat-reader acrobat-reader acrobat-reader acrobat-reader        
Phasor XS Data Sheet acrobat-reader acrobat-reader acrobat-reader acrobat-reader acrobat-reader     acrobat-reader
按此下载 Phasor XS Ultrasonic Portable Flaw Detector Software Update

连续变倍XTL-VI.jpg

本产品可用于产品的检测,目视及接入CCD连接到显视器或电脑上均可,并可选用简单、便利、实用型软体相结合。软件可作一些简单的测量及拍照、储存等,效率高。

DP-01DP系列无油真空泵

DP-01隔膜真空泵设计先进,结构紧凑合理、体积小、重量轻、移动方便、运转平稳、真空度高、噪音低、工作效率高、使用寿命长。它根据操作者的需要,选用不同材质,不同过滤孔径的过滤膜,达到除去溶剂内杂质、提纯、消菌的作用。在色谱分析中,经它过滤的溶剂,不但能有效延长色谱柱使用寿命,而且由于它的真空除去作用,也明显提高分析系统的数据精度。

该公司产品分类: 氘灯 色谱仪

KD-1281PS-A人体静电释放仪

Normal07.8 磅02falsefalsefalseMicrosoftInternetExplorer4

给我留言或点击QQ交流,我们会第一时间与您联系!泉镇电子用心服务-欢迎您的来电!

全国免费咨询热线: – 15618978032 联系人:左经理

人体静电释放器专业生产厂家,客户至上真诚服务,竭尽全力用心在做-质量看得见

十年专注安防行业,防静电设备我们做的更专业

产品使用场合

本安型防爆型除人体静电释放 消除 泄放 导除 接地 触摸报警球 装置 设备适用于:化工厂储罐区-液氨厂储罐-加油站-油库油罐区-油泵房-涂料厂-储罐区-酒精厂储罐区-油田采样口-石油化工厂-冶金厂储罐区-电厂液氨储罐-炼油厂油罐区-油罐区采样口-加气站-燃油库-煤矿-防爆车间-防爆仓库-军工单位-柴油库-采油厂等诸多易燃易爆场合

产品销售路线

销往山东/河北/河南/安徽/辽宁/山东/江苏/江西/河北/河南/浙江/辽宁/天津/大连/新疆/甘肃/四川/广东/广西/安徽/福建/湖北/湖南/重庆/云南/宁夏/内蒙古/吉林/上海/贵州/陕西/山西等全国各地. .防爆人体静电释放器是我公司的专利,我们是辽河油田、锦西石化、新疆乌石化、独山子炼油厂、塔里木油田、长庆油田、榆林炼油厂等各大石油、石化、油田的指定供货商

产品技术参数

检测静电压范围:-15KV+15KV

指示电压:﹥150V(人体安全静电压小于500V

放电时间:≤1S 0.

指示方式:指示灯亮

工作温度:-40℃~+60

防爆等级:ExiaIIBT4

产品机械参数

触摸球直径:Φ100mm

钢管直径:Φ63mm

钢管壁厚:1.2mm

产品高度:1000mm

重量:5kg

产品功能特点

触控感应,无机械活动部件

整体环氧树脂浇封,防腐、防水、防潮

防爆触摸球,安全释放静电,人体接触不产生电击感

接地线独立检测,接地电阻≤55Ω,确保可靠接地

产品服务承诺

1:凡本公司出售的产品保用期为一年,自出售日起一年内因产品自身机件、材料及工艺造成的质量问题,本公司免费修理

2:凡本公司出售的产品保用期过后仍负责对产品的免人工费修理,以保护客户的利益。

该公司产品分类: 气体探测器 高液位报警器 防静电控制器 静电接地夹 静电接地报警器 人体静电释放器

UVICURE Plus II美国EIT UVICURE Plus II 单通道 多功能 UV能量计

UVICURE PLUS II and UV POWER PUCK II TECHNICAL SPECIFICATIONS

Features:
  • Measures UV Peak irradiance (microW/cm2, mW/cm2, W/cm2) and total energy density (microJ/cm2, mJ/cm2, J/cm2) of one spectral bandwidth (Uvicure Plus II) or 4 different bandwidths simultaneously (UV Power Puck II).
  • New graph, data, and reference modes to provide choices in how to view the collected data
  • Compact Size: 4.6" Diameter (117mm) x 0.5"H (13mm)
  • Self-contained - battery-powered (user-replaceable AAA batteries)
  • Unit communicates via cable to your PC
Applications:
  • Curing applications of inks, adhesives, solder masks, and epoxies (not for use in web press applications)
  • Measure lamp performance
  • Compares the efficiencies of different UV curing systems
  • Compare any current reading to chosen baseline reference to compare your system over time
  • Establish UV level for proper curing

* Specifications are subject to change. EIT will not be responsible for discrepancies due to typographic errors.

 

欢迎详细咨询 经理     QQ:805791134    请登录 http://bikesu8.wjw.cn/了解详情

UV能量计 UV能量计价格 UV能量计电池更换  UV能量计生产厂家 现货供应UV能量计 UV能量计维修 UV能量计校准 UV能量计技术咨询和售后服务

Introduction

The radiometers that first set the standard for the UV industry are now setting a new standard with advanced features and an easy to read display, multiple user selectable modes, and PC communication for data logging and trending capabilities, and process verification.

The new EIT Instrument Markets UVICURE Plus II and UV Power Puck II are advanced versions of the UVICURE Plus and UV Power Puck widely used throughout the global UV industry. With user selectable sample rates, these new instruments can be used for fast conveyor lines or slower lines, and measurements are compatible with other EIT products.

Standard Features and Benefits Include: Easy to Use. One-Button Operation for On/Off and Run

Easy to Read Data Display of All 4 Bands. Data collected for all 4 bands on the UV Power Puck II is displayed simultaneously on screen in mW/cm2 and mJ/cm2 for quick and easy viewing by the operator. No need to toggle through all eight readings, one screen at a time. Soft buttons are used for function selections, and are indicated on the bottom of the display for easy operator selection and use.

Standard EIT Multiple Bandwidths: UVA (320-390nm), UVB (280-320nm), UVC (250-260nm), UVV (395-445nm)

Dynamic Range Standard unit - 10 Watt; UVA, UVB, UVV; 1 Watt UVC. Low Power unit -100 mW

Setup Function Provides user selectable instrument default modes for data analysis and comparison, screen, and operational settings.

Reference Mode Used for comparison between readings. Can be useful for system setup and troubleshooting. The user can store the selected UV reading in the radiometer as a base line or reference reading, then compare that reading to another. The radiometer will display both readings and indicate the percentage of change between readings. Data is displayed in mJ/cm2 and mW/cm2, and percentage.

Graph Mode A graph illustrating the collected UV irradiance and energy is displayed for each of the UV bands. Data is expressed in mW/cm2 vs. time. Graphs at right illustrate both a one and two-lamp system.

User Selectable Sample Rate Smooth On Data: Compatible with previous Power Puck versions. Smooth Off Data: Compatible with UV PowerMAP at over 2000 samples per second.

Unit of Measure The unit of measure is user selectable to provide ease of reading for operators. Display the data as you want to see it. Selections are: mJ/cm2, mW/cm2, J/cm2, W/cm2, µJ/cm2, µW/cm2

Colorful, Easy to Read Display Select low, medium, or high intensity for the graphical display.

Communications Port Serial communication protocol between unit and PC. Download collected data to a computer for statistical analysis and data logging, and process verification.

SPECIFICATIONS:
UVICURE PLUS II and UV POWER PUCK II
Display Easy to Read, Yellow Text on Black Background
Suggested Dynamic Ranges 10 Watt: UVA, UVB, UVV - 100mW/cm?to 10W/cm? UVC - 50mW/cm?to 1W/cm? Low Power Versions: UVA, UVB, UVC, UVV: 1mW/cm?to 100mW/cm? *Please note that units will urn on at irradiance values lower than the suggested operating ranges.
Accuracy +/- 10%; +/- 5% typical
Spectral Ranges (UV Power Puck?II) 4-channel simultaneous and continuous monitoring. 320-390nm (UVA), 280-320nm (UVB), 250-260nm (UVC), 395-445nm (UVV)
Spectral Ranges (UVICURE?Plus II) 1-channel continuous monitoring. 320-390nm (UVA), 280-320nm (UVB), 250-260nm (UVC), 395-445nm (UVV)
Spatial Response Approximately cosine
Operating Temperature 0-75 Internal temperature; tolerates high external temperatures for short periods (audible alarm indicates when temperature has exceeded tolerance)
Time-Out Period 2 minutes DISPLAY mode (no key activity).
Battery Two user-replaceable AAA Alkaline Cells
Battery Life Approx. 20 hours with display on
Dimensions 4.60 x 0.50 inches; 117 mm x 12.7 mm (D x H)
Weight 10.1 ounces (289 grams)
Package Material Aluminum, stainless steel
Carrying Case Material Cut polyurethane interior, scuff resistant nylon exterior cover
Carrying Case Weight 9 ounces (260 grams)
Carrying Case Dimensions 10.75 x 3.5 x 7.75 inches; 274 x 89 x 197 mm (W x H x D).

SPFSPF数字锁定平衡阀

 
SPF数字锁定平衡阀

适用于各种液体管路系统,是一种较为理想的新型节能阀门。该阀设有刻度数字显示,可直观调到任一位置,并可锁定。该阀主要应用于工业和民用建筑采暖管路系统。目前在一些管网系统中存在水力失调问题,平衡阀提供了解决这一问题的手段,用它可以的调节压力和流量,用以改善管网系统中液体流动状况,达到管网液体平衡和节约能源的目的。在双管网工程改造中,应用此阀门仍可节约能源,得到较好的效果。

该公司产品分类: 振动破碎再生机 震动再生机 震动再生机 回转反吹布袋除尘器 滤筒除尘器 旋风除尘器 螺旋输送机 磁选输送机 混砂机 多级化铁炉鼓风机 双极化铁炉鼓风机 单级化铁炉鼓风机 化铁炉风机 复合破碎机 磁选破碎机 除尘破碎机 树脂砂生产线 注浇包 抛丸清理机 吊钩式抛丸机

HG北京 天津 东北PT100 PT1000 测油温螺钉式温度传感器 价格95

PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

天津PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

东北PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

河北PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

山东PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

山西PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

四川PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

内蒙古PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京朝阳区PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京海淀区PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京丰台区PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京通州区PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京大兴区PT100 PT1000 测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京石景山区PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京门头沟区PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北 

 

北京怀柔PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

北京密云PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

北京平谷PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

北京房山PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

天津塘沽区PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

东北沈阳PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

东北大连PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

东北吉林PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

东北长春PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

东北黑龙江PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

山东青岛PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

山东济南PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

山东济宁PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

四川成都PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

四川德阳PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

四川德州PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

河北石家庄PT100 PT1000防水套管式温度传感器 价格65 北京 天津 东北 河北

 

河北唐山PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

河北保定PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

河北秦皇岛PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

山西大同PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

山西太原PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

内蒙古PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

银行PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

 

证劵PT100 PT1000测油温螺钉式温度传感器 价格95 北京 天津 东北

产品负责人:华盛光科技赖伟光

负责人电环: 13466624734

航插HG400套管式温度传感器JCJ100TLB[1]JCJ100TW 简易式温度传感器

产品概述

   HG31螺钉式铂电阻温度传感器是由测温元件、保护管、延长导线等组成,测温元件分为铂热电阻,铂热电阻:金属铂(PT)的电阻值随温度变化而变化,并且具有很好的重现性和稳定性,利用铂的此种物理特性制成的传感器,铂热电阻温度传感器精度高,稳定性好,应用温度范围广,是中低温区(-200~500)最常用的一种温度测温元件。

二、产品特点

高精度、稳定性好良好的焊接工艺,防震、防潮测温量程宽产品结构设计合理,过程连接接口灵活方便,体积小,重量轻,安装位置任意壳体保护材料多样化,适应多种介质测量

三、性能参数

铂电阻的温度系数

按IEC751 国际标准, 温度系数TCR=0.003851,Pt100(R0=100Ω)、Pt1000(R0=1000Ω)为统一设计型铂电阻。

TCR=(R100-R0)/ (R0×100)

阻值(Ω)

分 度 号

0℃时标准电阻值R0

100℃时标准电阻值R100

Pt100

100.00

138.51

Pt1000

1000.0

1385.1

表1

 

四、选型指南

 

HG31

螺钉式温度传感器

 

 

代码

产品类型

T1

螺钉式

 

代码

感温元件材质 双支加D

1

铂电阻(Pt100)

5

铂电阻(Pt500)

10

铂电阻(Pt1000)

K

K型

B

B型

X

客户

 

代码

保护管直径(mm)

3

3

6

6

10

10

16

16

X

客户

 

代码

保护管长度(mm)

EL05

50

EL1

100

EL2

200

EL5

500

X

客户

 

代码

保护管材质

M1

304不锈钢

M2

316不锈钢

M3

客户

 

代码

过程连接方式

C1

M8×1.25

C2

M16×1.5

C3

M20×1.5

C4

客户

 

代码

测量范围

T1

-200~100

T2

-50~100

T3

-50~200

T4

0~100

T5

客户

 

代码

引线方式

2

两线

3

三线

4

四线

 

代码

精度

A

A级

B

B级

HG31

T1

P

8

EL1

M1

C1

1

2

A

选型举例

 

主营产品:传感器、变送器、温度传感器、湿度传感器、温湿度传感器、高温型温湿度传感器、温度变送器、湿度变送器、温湿度变送器、          高温型温湿度变送器、露点传感器、露点测控仪、压力传感器、液位传感器、压力变送器、液位变送器及各种仪表、仪器、          调节仪表、显示仪表、测量仪表、测控仪表、记录仪表、巡检仪表、无纸记录仪、智信报警器主营项目:无线gprs温湿度监控系统,药品库温湿度控制系统,医院药品冷柜温湿度监控系统,医药冷链物流远程监控系统,          机房温湿度监控系统,机房环境综合控制管理系统,温室大棚智能监控系统,农业大棚手机温湿度监控系统

该公司产品分类: 医药库房GSP认证系列 环境监控系列 农业气象监控系列 大棚监控系列 档案馆环境监控 机房环境监控系列 温度传感器/变送器 温湿度传感器/变送器

A13P-2|A20P-2|A25P-2|A40P-2|A50P-2日本AICHI零压阀A-P系列均压阀,A25P-2|A40P-2|A50P-2零压阀

AICHI爱知零压阀,AICHI A-P系列零压阀/均压阀,AICHI零压阀,A13P-2|A20P-2|A25P-2|A40P-2|A50P-2高性能均压阀 

AICHI爱知A-P系列零压阀/均压阀的参数如下:

■型号名称

A13P~A50P-2-----高性能型

■特长

●此均圧阀、具有相同口径的型式与相同的容量(同本公司比)。 ●流量范围(最适合的条件在1/100)、确保从小流量至大流量范围、高精度控制精密燃气比。 ●采用此均圧阀,节省能源、率的功能可以得以发挥。

●标准规格

●一次侧压力P1=1~20KPa●二次侧压力P2=0KPa●口径=1/2~2B(15~50A)

●容量

型号

A13P-2

A20P-2

A25P-2

A40P-2

A50P-2

差压

0.5KPa

6

11

22

45

90

1KPa

8

15

31

63

127

1.5KPa

10

19

38

78

155

2KPa以上

12

23

45

90

180

该公司产品分类: MADAS马达斯调压器、电磁阀 AIRTAC亚德客电磁阀 亚德客气控阀 AIRTAC气源处理元件 AIRTAC亚德客产品序列 SENSUS胜赛斯调压器 日本AICHI爱知调压器 GENTEC捷锐减压器 AMCO气体减压阀 REGO燃气减压阀 fisher减压阀 ITRON调压阀 RMG调压器 日本伊藤ITOKOKI调压器 减压阀/调压器

iC65N-C20A/1P广东施耐德断路器iC65N-C20A/1P

广东施耐德断路器iC65N-C20A/1PiC65N-C20A/1P施耐德断路器

一、C65小型断路器常识简介断路器,又称空气开关,也称自动开关,低压断路器。原理是:当工作电流超过额定电流、短路、失压等情况下,自动切断电路。 目前,家庭总开关常见的有闸--刀开关配瓷插保险(已被淘汰)或空气开关(带漏电保护的小型断路器)。目前家庭使用DZ系列的空气开关,常见的有以下型号/规格: C16、 C25、C32、C40、C63等规格,其中C表示脱扣电流,即起跳电流,例如C32表示起跳电流为32安,一般安装6500W热水器要用C32,安装7500W、328500W热水器要用C40的空开。(注:功率÷电压=安培,即6500W÷220V=29.55≈32A)

二、技术参数#:符合标准:GB16917/IEC61009;#: 额定电压:(AC V):230/400#:额定电流:(A):6 ~ 63#:分断能力:(KA):6#:脱扣特性:C#:额定剩余动作电流:30mA,AC类#:极数:1P+N/2/3/4P#:机械寿命:20,000次#:接线:6~32,适用于25mm2及以下导线;40~63,适用于35mm2及以下导线;#:获得CCC认证证

三、  选购安装现代家居用电应按照明回路、电源插座回路、空调回路、分开布线,当其中一个回路(如插座回路)出现故障时,其他回路仍可以正常供电。插座回路须安装漏电保护装置,防止家用电器漏电造成人身电击事故。1、住户配电箱总开关一般选择双极32-63A小型断路器或隔离开关。2、照明回路一般10-16A小型断路器。3、插座回路一般选择16-20A的漏电保护断路器。4、空调回路一般选择16-25A小型断路器。5、采用双极或1P+N(相线+中性线)断路器,当线路出现短路或漏电故障时,立即切断电源的相线和中性线,确保人身安全及用电设备的安全。以上选择仅供参考,每户的实际用电器功率不一样,具体选择要按电工设计为准。

施耐德电气产品客户选型:
  1. 1.iC65N-C1A/1P
  2. 2.iC65N-C1A/1P+iMX
  3. 3.iC65N-C1A/1P+iMX+OF
  4. 4.iC65N-C1A/1P+iMN-AC220-240V
  5. 5.iC65N-C1A/1P+iMSU-AC275V
  6. 6.iC65N-C1A/1P+ELE 30mA
  7. 7.iC65N-C1A/1P+VEA 30mA
  8. 8.iC65N-C2A/1P
  9. 9.iC65N-C2A/1P+iMX
  10. 10.iC65N-C2A/1P+iMX+OF
  11. 11.iC65N-C2A/1P+iMN-AC220-240V
  12. 12.iC65N-C2A/1P+iMSU-AC275V
  13. 13.iC65N-C2A/1P+ELE 30mA
  14. 14.iC65N-C2A/1P+VEA 30mA
  15. 15.iC65N-C4A/1P
  16. 16.iC65N-C4A/1P+iMX
  17. 17.iC65N-C4A/1P+iMX+OF
  18. 18.iC65N-C4A/1P+iMN-AC220-240V
  19. 19.iC65N-C4A/1P+iMSU-AC275V
  20. 20.iC65N-C4A/1P+ELE 30mA
  21. 21.iC65N-C4A/1P+VEA 30mA
  22. 22.iC65N-C6A/1P
  23. 23.iC65N-C6A/1P+iMX
  24. 24.iC65N-C6A/1P+iMX+OF
  25. 25.iC65N-C6A/1P+iMN-AC220-240V
  26. 26.iC65N-C6A/1P+iMSU-AC275V
  27. 27.iC65N-C6A/1P+ELE 30mA
  28. 28.iC65N-C6A/1P+VEA 30mA
  29. 29.iC65N-C10A/1P
  30. 30.iC65N-C10A/1P+iMX
  31. 31.iC65N-C10A/1P+iMX+OF
  32. 32.iC65N-C10A/1P+iMN-AC220-240V
  33. 33.iC65N-C10A/1P+iMSU-AC275V
  34. 34.iC65N-C10A/1P+ELE 30mA
  35. 35.iC65N-C10A/1P+VEA 30mA
  36. 36.iC65N-C16A/1P
  37. 37.iC65N-C16A/1P+iMX
  38. 38.iC65N-C16A/1P+iMX+OF
  39. 39.iC65N-C16A/1P+iMN-AC220-240V
  40. 40.iC65N-C16A/1P+iMSU-AC275V
  41. 41.iC65N-C16A/1P+ELE 30mA
  42. 42.iC65N-C16A/1P+VEA 30mA
  43. 43.iC65N-C20A/1P
  44. 44.iC65N-C20A/1P+iMX
  45. 45.iC65N-C20A/1P+iMX+OF
  46. 46.iC65N-C20A/1P+iMN-AC220-240V
  47. 47.iC65N-C20A/1P+iMSU-AC275V
  48. 48.iC65N-C20A/1P+ELE 30mA
  49. 49.iC65N-C20A/1P+VEA 30mA
  50. 50.iC65N-C25A/1P
  51. 51.iC65N-C25A/1P+iMX
  52. 52.iC65N-C25A/1P+iMX+OF
  53. 53.iC65N-C25A/1P+iMN-AC220-240V
  54. 54.iC65N-C25A/1P+iMSU-AC275V
  55. 55.iC65N-C25A/1P+ELE 30mA
  56. 56.iC65N-C25A/1P+VEA 30mA
  57. 57.iC65N-C32A/1P
  58. 58.iC65N-C32A/1P+iMX
  59. 59.iC65N-C32A/1P+iMX+OF
  60. 60.iC65N-C32A/1P+iMN-AC220-240V
  61. 61.iC65N-C32A/1P+iMSU-AC275V
  62. 62.iC65N-C32A/1P+ELE 30mA
  63. 63.iC65N-C32A/1P+VEA 30mA
  64. 64.iC65N-C40A/1P
  65. 65.iC65N-C40A/1P+iMX
  66. 66.iC65N-C40A/1P+iMX+OF
  67. 67.iC65N-C40A/1P+iMN-AC220-240V
  68. 68.iC65N-C40A/1P+iMSU-AC275V
  69. 69.iC65N-C40A/1P+ELE 30mA
  70. 70.iC65N-C40A/1P+VEA 30mA
  71. 71.iC65N-C50A/1P
  72. 72.iC65N-C50A/1P+iMX
  73. 73.iC65N-C50A/1P+iMX+OF
  74. 74.iC65N-C50A/1P+iMN-AC220-240V
  75. 75.iC65N-C50A/1P+iMSU-AC275V
  76. 76.iC65N-C50A/1P+ELE 30mA
  77. 77.iC65N-C50A/1P+VEA 30mA
  78. 78.iC65N-C63A/1P
  79. 79.iC65N-C63A/1P+iMX
  80. 80.iC65N-C63A/1P+iMX+OF
  81. 81.iC65N-C63A/1P+iMN-AC220-240V
  82. 82.iC65N-C63A/1P+iMSU-AC275V
  83. 83.iC65N-C63A/1P+ELE 30mA
  84. 84.iC65N-C63A/1P+VEA 30mA
  85. 85.iC65N-D1A/1P
  86. 86.iC65N-D1A/1P+iMX
  87. 87.iC65N-D1A/1P+iMX+OF
  88. 88.iC65N-D1A/1P+iMN-AC220-240V
  89. 89.iC65N-D1A/1P+iMSU-AC275V
  90. 90.iC65N-D1A/1P+ELE 30mA
  91. 91.iC65N-D1A/1P+VEA 30mA
  92. 92.iC65N-D2A/1P
  93. 93.iC65N-D2A/1P+iMX
  94. 94.iC65N-D2A/1P+iMX+OF
  95. 95.iC65N-D2A/1P+iMN-AC220-240V
  96. 96.iC65N-D2A/1P+iMSU-AC275V
  97. 97.iC65N-D2A/1P+ELE 30mA
  98. 98.iC65N-D2A/1P+VEA 30mA
  99. 99.iC65N-D4A/1P
  100. 100.iC65N-D4A/1P+iMX
  101. 101.iC65N-D4A/1P+iMX+OF
  102. 102.iC65N-D4A/1P+iMN-AC220-240V
  103. 103.iC65N-D4A/1P+iMSU-AC275V
  104. 104.iC65N-D4A/1P+ELE 30mA
  105. 105.iC65N-D4A/1P+VEA 30mA
  106. 106.iC65N-D6A/1P
  107. 107.iC65N-D6A/1P+iMX
  108. 108.iC65N-D6A/1P+iMX+OF
  109. 109.iC65N-D6A/1P+iMN-AC220-240V
  110. 110.iC65N-D6A/1P+iMSU-AC275V
  111. 111.iC65N-D6A/1P+ELE 30mA
  112. 112.iC65N-D6A/1P+VEA 30mA
  113. 113.iC65N-D10A/1P
  114. 114.iC65N-D10A/1P+iMX
  115. 115.iC65N-D10A/1P+iMX+OF
  116. 116.iC65N-D10A/1P+iMN-AC220-240V
  117. 117.iC65N-D10A/1P+iMSU-AC275V
  118. 118.iC65N-D10A/1P+ELE 30mA
  119. 119.iC65N-D10A/1P+VEA 30mA
  120. 120.iC65N-D16A/1P
  121. 121.iC65N-D16A/1P+iMX
  122. 122.iC65N-D16A/1P+iMX+OF
  123. 123.iC65N-D16A/1P+iMN-AC220-240V
  124. 124.iC65N-D16A/1P+iMSU-AC275V
  125. 125.iC65N-D16A/1P+ELE 30mA
  126. 126.iC65N-D16A/1P+VEA 30mA
  127. 127.iC65N-D20A/1P
  128. 128.iC65N-D20A/1P+iMX
  129. 129.iC65N-D20A/1P+iMX+OF
  130. 130.iC65N-D20A/1P+iMN-AC220-240V
  131. 131.iC65N-D20A/1P+iMSU-AC275V
  132. 132.iC65N-D20A/1P+ELE 30mA
  133. 133.iC65N-D20A/1P+VEA 30mA
  134. 134.iC65N-D25A/1P
  135. 135.iC65N-D25A/1P+iMX
  136. 136.iC65N-D25A/1P+iMX+OF
  137. 137.iC65N-D25A/1P+iMN-AC220-240V
  138. 138.iC65N-D25A/1P+iMSU-AC275V
  139. 139.iC65N-D25A/1P+ELE 30mA
  140. 140.iC65N-D25A/1P+VEA 30mA
  141. 141.iC65N-D32A/1P
  142. 142.iC65N-D32A/1P+iMX
  143. 143.iC65N-D32A/1P+iMX+OF
  144. 144.iC65N-D32A/1P+iMN-AC220-240V
  145. 145.iC65N-D32A/1P+iMSU-AC275V
  146. 146.iC65N-D32A/1P+ELE 30mA
  147. 147.iC65N-D32A/1P+VEA 30mA
  148. 148.iC65N-D40A/1P
  149. 149.iC65N-D40A/1P+iMX
  150. 150.iC65N-D40A/1P+iMX+OF
  151. 151.iC65N-D40A/1P+iMN-AC220-240V
  152. 152.iC65N-D40A/1P+iMSU-AC275V
  153. 153.iC65N-D40A/1P+ELE 30mA
  154. 154.iC65N-D40A/1P+VEA 30mA
  155. 155.iC65N-D50A/1P
  156. 156.iC65N-D50A/1P+iMX
  157. 157.iC65N-D50A/1P+iMX+OF
  158. 158.iC65N-D50A/1P+iMN-AC220-240V
  159. 159.iC65N-D50A/1P+iMSU-AC275V
  160. 160.iC65N-D50A/1P+ELE 30mA
  161. 161.iC65N-D50A/1P+VEA 30mA
  162. 162.iC65N-D63A/1P
  163. 163.iC65N-D63A/1P+iMX
  164. 164.iC65N-D63A/1P+iMX+OF
  165. 165.iC65N-D63A/1P+iMN-AC220-240V
  166. 166.iC65N-D63A/1P+iMSU-AC275V
  167. 167.iC65N-D63A/1P+ELE 30mA
  168. 168.iC65N-D63A/1P+VEA 30mA
  169. 169.iC65N-B1A/1P
  170. 170.iC65N-B1A/1P+iMX
  171. 171.iC65N-B1A/1P+iMX+OF
  172. 172.iC65N-B1A/1P+iMN-AC220-240V
  173. 173.iC65N-B1A/1P+iMSU-AC275V
  174. 174.iC65N-B1A/1P+ELE 30mA
  175. 175.iC65N-B1A/1P+VEA 30mA
  176. 176.iC65N-B2A/1P
  177. 177.iC65N-B2A/1P+iMX
  178. 178.iC65N-B2A/1P+iMX+OF
  179. 179.iC65N-B2A/1P+iMN-AC220-240V
  180. 180.iC65N-B2A/1P+iMSU-AC275V
  181. 181.iC65N-B2A/1P+ELE 30mA
  182. 182.iC65N-B2A/1P+VEA 30mA
  183. 183.iC65N-B3A/1P
  184. 184.iC65N-B3A/1P+iMX
  185. 185.iC65N-B3A/1P+iMX+OF
  186. 186.iC65N-B3A/1P+iMN-AC220-240V
  187. 187.iC65N-B3A/1P+iMSU-AC275V
  188. 188.iC65N-B3A/1P+ELE 30mA
  189. 189.iC65N-B3A/1P+VEA 30mA
  190. 190.iC65N-B4A/1P
  191. 191.iC65N-B4A/1P+iMX
  192. 192.iC65N-B4A/1P+iMX+OF
  193. 193.iC65N-B4A/1P+iMN-AC220-240V
  194. 194.iC65N-B4A/1P+iMSU-AC275V
  195. 195.iC65N-B4A/1P+ELE 30mA
  196. 196.iC65N-B4A/1P+VEA 30mA
  197. 197.iC65N-B6A/1P
  198. 198.iC65N-B6A/1P+iMX
  199. 199.iC65N-B6A/1P+iMX+OF
  200. 200.iC65N-B6A/1P+iMN-AC220-240V
  201. 201.iC65N-B6A/1P+iMSU-AC275V
  202. 202.iC65N-B6A/1P+ELE 30mA
  203. 203.iC65N-B6A/1P+VEA 30mA
  204. 204.iC65N-B10A/1P
  205. 205.iC65N-B10A/1P+iMX
  206. 206.iC65N-B10A/1P+iMX+OF
  207. 207.iC65N-B10A/1P+iMN-AC220-240V
  208. 208.iC65N-B10A/1P+iMSU-AC275V
  209. 209.iC65N-B10A/1P+ELE 30mA
  210. 210.iC65N-B10A/1P+VEA 30mA
  211. 211.iC65N-B16A/1P
  212. 212.iC65N-B16A/1P+iMX
  213. 213.iC65N-B16A/1P+iMX+OF
  214. 214.iC65N-B16A/1P+iMN-AC220-240V
  215. 215.iC65N-B16A/1P+iMSU-AC275V
  216. 216.iC65N-B16A/1P+ELE 30mA
  217. 217.iC65N-B16A/1P+VEA 30mA
  218. 218.iC65N-B20A/1P
  219. 219.iC65N-B20A/1P+iMX
  220. 220.iC65N-B20A/1P+iMX+OF
  221. 221.iC65N-B20A/1P+iMN-AC220-240V
  222. 222.iC65N-B20A/1P+iMSU-AC275V
  223. 223.iC65N-B20A/1P+ELE 30mA
  224. 224.iC65N-B20A/1P+VEA 30mA
  225. 225.iC65N-B25A/1P
  226. 226.iC65N-B25A/1P+iMX
  227. 227.iC65N-B25A/1P+iMX+OF
  228. 228.iC65N-B25A/1P+iMN-AC220-240V
  229. 229.iC65N-B25A/1P+iMSU-AC275V
  230. 230.iC65N-B25A/1P+ELE 30mA
  231. 231.iC65N-B25A/1P+VEA 30mA
  232. 232.iC65N-B32A/1P
  233. 233.iC65N-B32A/1P+iMX
  234. 234.iC65N-B32A/1P+iMX+OF
  235. 235.iC65N-B32A/1P+iMN-AC220-240V
  236. 236.iC65N-B32A/1P+iMSU-AC275V
  237. 237.iC65N-B32A/1P+ELE 30mA
  238. 238.iC65N-B32A/1P+VEA 30mA
  239. 239.iC65N-B40A/1P
  240. 240.iC65N-B40A/1P+iMX
  241. 241.iC65N-B40A/1P+iMX+OF
  242. 242.iC65N-B40A/1P+iMN-AC220-240V
  243. 243.iC65N-B40A/1P+iMSU-AC275V
  244. 244.iC65N-B40A/1P+ELE 30mA
  245. 245.iC65N-B40A/1P+VEA 30mA
  246. 246.iC65N-B50A/1P
  247. 247.iC65N-B50A/1P+iMX
  248. 248.iC65N-B50A/1P+iMX+OF
  249. 249.iC65N-B50A/1P+iMN-AC220-240V
  250. 250.iC65N-B50A/1P+iMSU-AC275V
  251. 251.iC65N-B50A/1P+ELE 30mA
  252. 252.iC65N-B50A/1P+VEA 30mA
  253. 253.iC65N-B63A/1P
  254. 254.iC65N-B63A/1P+iMX
  255. 255.iC65N-B63A/1P+iMX+OF
  256. 256.iC65N-B63A/1P+iMN-AC220-240V
  257. 257.iC65N-B63A/1P+iMSU-AC275V
  258. 258.iC65N-B63A/1P+ELE 30mA
  259. 259.iC65N-B63A/1P+VEA 30mA
  260. 260.iC65N-C1A/2P
  261. 261.iC65N-C1A/2P+iMX
  262. 262.iC65N-C1A/2P+iMX+OF
  263. 263.iC65N-C1A/2P+iMN-AC220-240V
  264. 264.iC65N-C1A/2P+iMSU-AC275V
  265. 265.iC65N-C1A/2P+ELE 30mA
  266. 266.iC65N-C1A/2P+ELE 100mA
  267. 267.iC65N-C1A/2P+ELE 300mA
  268. 268.iC65N-C1A/2P+ELE 300mA S
  269. 269.iC65N-C1A/2P+VEG 30mA
  270. 270.iC65N-C1A/2P+VEA 30mA
  271. 271.iC65N-C1A/2P+VM 30mA
  272. 272.iC65N-C2A/2P
  273. 273.iC65N-C2A/2P+iMX
  274. 274.iC65N-C2A/2P+iMX+OF
  275. 275.iC65N-C2A/2P+iMN-AC220-240V
  276. 276.iC65N-C2A/2P+iMSU-AC275V
  277. 277.iC65N-C2A/2P+ELE 30mA
  278. 278.iC65N-C2A/2P+ELE 100mA
  279. 279.iC65N-C2A/2P+ELE 300mA
  280. 280.iC65N-C2A/2P+ELE 300mA S
  281. 281.iC65N-C2A/2P+VEG 30mA
  282. 282.iC65N-C2A/2P+VEA 30mA
  283. 283.iC65N-C2A/2P+VM 30mA
  284. 284.iC65N-C4A/2P
  285. 285.iC65N-C4A/2P+iMX
  286. 286.iC65N-C4A/2P+iMX+OF
  287. 287.iC65N-C4A/2P+iMN-AC220-240V
  288. 288.iC65N-C4A/2P+iMSU-AC275V
  289. 289.iC65N-C4A/2P+ELE 30mA
  290. 290.iC65N-C4A/2P+ELE 100mA
  291. 291.iC65N-C4A/2P+ELE 300mA
  292. 292.iC65N-C4A/2P+ELE 300mA S
  293. 293.iC65N-C4A/2P+VEG 30mA
  294. 294.iC65N-C4A/2P+VEA 30mA
  295. 295.iC65N-C4A/2P+VM 30mA
  296. 296.iC65N-C6A/2P
  297. 297.iC65N-C6A/2P+iMX
  298. 298.iC65N-C6A/2P+iMX+OF
  299. 299.iC65N-C6A/2P+iMN-AC220-240V
  300. 300.iC65N-C6A/2P+iMSU-AC275V
  301. 301.iC65N-C6A/2P+ELE 30mA
  302. 302.iC65N-C6A/2P+ELE 100mA
  303. 303.iC65N-C6A/2P+ELE 300mA
  304. 304.iC65N-C6A/2P+ELE 300mA S
  305. 305.iC65N-C6A/2P+VEG 30mA
  306. 306.iC65N-C6A/2P+VEA 30mA
  307. 307.iC65N-C6A/2P+VM 30mA
  308. 308.iC65N-C10A/2P
  309. 309.iC65N-C10A/2P+iMX
  310. 310.iC65N-C10A/2P+iMX+OF
  311. 311.iC65N-C10A/2P+iMN-AC220-240V
  312. 312.iC65N-C10A/2P+iMSU-AC275V
  313. 313.iC65N-C10A/2P+ELE 30mA
  314. 314.iC65N-C10A/2P+ELE 100mA
  315. 315.iC65N-C10A/2P+ELE 300mA
  316. 316.iC65N-C10A/2P+ELE 300mA S
  317. 317.iC65N-C10A/2P+VEG 30mA
  318. 318.iC65N-C10A/2P+VEA 30mA
  319. 319.iC65N-C10A/2P+VM 30mA
  320. 320.iC65N-C16A/2P
  321. 321.iC65N-C16A/2P+iMX
  322. 322.iC65N-C16A/2P+iMX+OF
  323. 323.iC65N-C16A/2P+iMN-AC220-240V
  324. 324.iC65N-C16A/2P+iMSU-AC275V
  325. 325.iC65N-C16A/2P+ELE 30mA
  326. 326.iC65N-C16A/2P+ELE 100mA
  327. 327.iC65N-C16A/2P+ELE 300mA
  328. 328.iC65N-C16A/2P+ELE 300mA S
  329. 329.iC65N-C16A/2P+VEG 30mA
  330. 330.iC65N-C16A/2P+VEA 30mA
  331. 331.iC65N-C16A/2P+VM 30mA
  332. 332.iC65N-C20A/2P
  333. 333.iC65N-C20A/2P+iMX
  334. 334.iC65N-C20A/2P+iMX+OF
  335. 335.iC65N-C20A/2P+iMN-AC220-240V
  336. 336.iC65N-C20A/2P+iMSU-AC275V
  337. 337.iC65N-C20A/2P+ELE 30mA
  338. 338.iC65N-C20A/2P+ELE 100mA
  339. 339.iC65N-C20A/2P+ELE 300mA
  340. 340.iC65N-C20A/2P+ELE 300mA S
  341. 341.iC65N-C20A/2P+VEG 30mA
  342. 342.iC65N-C20A/2P+VEA 30mA
  343. 343.iC65N-C20A/2P+VM 30mA
  344. 344.iC65N-C25A/2P
  345. 345.iC65N-C25A/2P+iMX
  346. 346.iC65N-C25A/2P+iMX+OF
  347. 347.iC65N-C25A/2P+iMN-AC220-240V
  348. 348.iC65N-C25A/2P+iMSU-AC275V
  349. 349.iC65N-C25A/2P+ELE 30mA
  350. 350.iC65N-C25A/2P+ELE 100mA
  351. 351.iC65N-C25A/2P+ELE 300mA
  352. 352.iC65N-C25A/2P+ELE 300mA S
  353. 353.iC65N-C25A/2P+VEG 30mA
  354. 354.iC65N-C25A/2P+VEA 30mA
  355. 355.iC65N-C25A/2P+VM 30mA
  356. 356.iC65N-C32A/2P
  357. 357.iC65N-C32A/2P+iMX
  358. 358.iC65N-C32A/2P+iMX+OF
  359. 359.iC65N-C32A/2P+iMN-AC220-240V
  360. 360.iC65N-C32A/2P+iMSU-AC275V
  361. 361.iC65N-C32A/2P+ELE 30mA
  362. 362.iC65N-C32A/2P+ELE 100mA
  363. 363.iC65N-C32A/2P+ELE 300mA
  364. 364.iC65N-C32A/2P+ELE 300mA S
  365. 365.iC65N-C32A/2P+VEG 30mA
  366. 366.iC65N-C32A/2P+VEA 30mA
  367. 367.iC65N-C32A/2P+VM 30mA
  368. 368.iC65N-C40A/2P
  369. 369.iC65N-C40A/2P+iMX
  370. 370.iC65N-C40A/2P+iMX+OF
  371. 371.iC65N-C40A/2P+iMN-AC220-240V
  372. 372.iC65N-C40A/2P+iMSU-AC275V
  373. 373.iC65N-C40A/2P+ELE 30mA
  374. 374.iC65N-C40A/2P+ELE 100mA
  375. 375.iC65N-C40A/2P+ELE 300mA
  376. 376.iC65N-C40A/2P+ELE 300mA S
  377. 377.iC65N-C40A/2P+VEG 30mA
  378. 378.iC65N-C40A/2P+VEA 30mA
  379. 379.iC65N-C40A/2P+VM 30mA
  380. 380.iC65N-C50A/2P
  381. 381.iC65N-C50A/2P+iMX
  382. 382.iC65N-C50A/2P+iMX+OF
  383. 383.iC65N-C50A/2P+iMN-AC220-240V
  384. 384.iC65N-C50A/2P+iMSU-AC275V
  385. 385.iC65N-C50A/2P+ELE 30mA
  386. 386.iC65N-C50A/2P+ELE 100mA
  387. 387.iC65N-C50A/2P+ELE 100mA S
  388. 388.iC65N-C50A/2P+ELE 300mA
  389. 389.iC65N-C50A/2P+ELE 300mA S
  390. 390.iC65N-C50A/2P+VEG 30mA
  391. 391.iC65N-C50A/2P+VEA 30mA
  392. 392.iC65N-C50A/2P+VM 30mA
  393. 393.iC65N-C50A/2P+VM 100mA
  394. 394.iC65N-C50A/2P+VM 300mA
  395. 395.iC65N-C50A/2P+VM 300mA
该公司产品分类: 欧姆龙 施耐德 三菱 三菱漏电开关 三菱塑壳断路器

最新产品

热门仪器: 液相色谱仪 气相色谱仪 原子荧光光谱仪 可见分光光度计 液质联用仪 压力试验机 酸度计(PH计) 离心机 高速离心机 冷冻离心机 生物显微镜 金相显微镜 标准物质 生物试剂