BTG90CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG24CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG12CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG6CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG3CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG1.5CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG09CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG045CN日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG24CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG36CN-S日本东日转矩量仪

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ?1 ~ ?6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ?1 ~ ?8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face （not shown in picture）are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. （Plastic chuck is shown in the photo above）

该公司产品分类： 喜百事 孔径规 塞尺 EISEN精密针规 FSK精密水平仪 RIKEN精密水平仪 RSK精密水平仪 ONO SEIKI小野转速计 ASKER橡胶硬度计 TECLOCK得乐橡胶硬度计 ANRITSU安立温计 PTC表面温度计 ISUZU东京温度计 SATO佐滕温湿度计 SK 国产放大镜 OTSUKA大冢台放大镜 PEAK放大镜 张力计 扭力工具 推拉力计
  • 共44条共5页
  • 1
  • 2
  • 3
  • 4
  • 5

    • 最新产品

    热门仪器： 液相色谱仪 气相色谱仪 原子荧光光谱仪 可见分光光度计 液质联用仪 压力试验机 酸度计（PH计） 离心机 高速离心机 冷冻离心机 生物显微镜 金相显微镜 标准物质 生物试剂